Reticulum Radio Settings
I don't know if these are good values or even where I got them, possibly from the reticulum manual, or a random page somewhere:
[[RNode LoRa Interface]]
type = RNodeInterface
enabled = yes
port = /dev/ttyUSB0 # Linux (heltec v3/v4)
# Frequency in Hz — must match your band
frequency = 915000000 # 915.0 MHz (US)
# LoRa radio parameters
bandwidth = 125000 # 125 kHz — standard, balanced
txpower = 7 # dBm — 7 = ~5 mW, legal, conservative
spreadingfactor = 8 # SF8 — good balance of range vs speed
codingrate = 5 # Coding rate 4/5 — default
I have these settings on scarab, two20andseven, and coppertop. Coppertop is bridged via IP to thatit.be.
Navigation